Hasil Pencarian  ::  Simpan CSV :: Kembali

"The electronic and optical properties of a-Al2O3 after induced by 3-keV Ar+ sputtering have been studied quantitatively by use of reflection electron energy loss spectroscopy (REELS) spectra. The band gap values of a-Al2O3 was determined from the onset values of the energy loss spectrum to the background level of REELS spectra as a function of time Ar+ bombardment. The bandgap changes from 8.4 eV before sputtering to 6.2 eV after 4 minutes of sputtering.The optical properties of α-Al2O3 thin films have been determined by comparing the experimental cross section obtained from reflection electron energy loss spectroscopy with the theoretical inelastic scattering cross section, deduced from the simulated energy loss function (ELF) by using QUEELS-ε(k)-REELS software. The peak assignments are based on ELF and compared with reported data on the electronic structure of α-Al2O3 obtained using different techniques. The results demonstrate that the electronic and optical properties before and after surface reduction will provide further understanding in the fundamental properties of α-Al2O3 which will be useful in the design, modeling and analysis of devices applications performance."

"The definition of the physical and mechanicalproperties of sugarcane trash pellets were necessary for the designconsiderations relating to storage, handling andprocessing equipment. The mixing ratios of groundsugarcane trash:cassava starch:water content (1.0:0.25:0.85 and 1.0:0.25:1.40 by weight) and pelleting speeds (100, 120, 140, and 160 rpm) were considered to determine their effects on bulkdensity, true density, porosity, durability and compressive strength. The results show that the mixing ratio byweight of 1.0:0.25:0.85 and pelleting speed of 120to 140 rpm were optimum for producing the sugarcane trash pellets. At the moisture content of 12.01% (wb), the bulk density, true density, durability and compressive strengthof biomass pellets were in the range of 330.93 to 365.00 kg/m3, 860.38 to 918.43 kg/m3, 99.34 to 99.46 % and 5.15 to 6.43 MPa, respectively."

"In any heterogeneous system, porting reconfigurable computing is often a highperformance platform for a broad range of computationally challenging issues.However, efficiently utilizing the maximum potential of these reconfigurablesystems is a difficult job without understanding their performancecharacteristics. This work proposes an analytic performance model using PetriNets (PN) for a Reconfigurable OR1200 (ROR1200) soft-core processor with modelvalidation and verifications. By modeling the ROR1200 system using Petri Nets,both behavioral and structural properties existing in parallel systems wereanalyzed. The Bound Level Analysis with respect to the dependency level of datais also performed on Soft Core Processors (SCP) like the ROR1200, the OR1200and the MicroBlaze."

"In any heterogeneous system, porting reconfigurable computing is often a high performance platform for a broad range of computationally challenging issues. However, efficiently utilizing the maximum potential of these reconfigurable systems is a difficult job without understanding their performance characteristics. This work proposes an analytic performance model using Petri Nets (PN) for a Reconfigurable OR1200 (ROR1200) soft-core processor with model validation and verifications. By modeling the ROR1200 system using Petri Nets, both behavioral and structural properties existing in parallel systems were analyzed. The Bound Level Analysis with respect to the dependency level of data is also performed on Soft Core Processors (SCP) like the ROR1200, the OR1200 and the MicroBlaze."

"The definition of the physical and mechanical properties of sugarcane trash pellets were necessary for the design considerations relating to storage, handling and processing equipment. The mixing ratios of ground sugarcane trash:cassava starch:water content (1.0:0.25:0.85 and 1.0:0.25:1.40 by weight) and pelleting speeds (100, 120, 140, and 160 rpm) were considered to determine their effects on bulk density, true density, porosity, durability and compressive strength. The results show that the mixing ratio by weight of 1.0:0.25:0.85 and pelleting speed of 120 to 140 rpm were optimum for producing the sugarcane trash pellets. At the moisture content of 12.01% (wb), the bulk density, true density, durability and compressive strength of biomass pellets were in the range of 330.93 to 365.00 kg/m3, 860.38 to 918.43 kg/m3, 99.34 to 99.46 % and 5.15 to 6.43 MPa, respectively."